Hi, my name is Michiel and made a short introduction in the appropriate section. I have a 'problem' with my 'smart'. The signs are there because it's not a problem, I broke it myself and it's not a Smart, it's a Smart powered van (in the making).
I cut out the parts of the wiring loom which I did not want to use and since I didn't want to use the brake assist (since I thought it was only for adaptive cruise control) I cut it out. They actually prevent the car to go to ready mode, I hear the relay's in the battery click and it's charging. But no green ready sign just the watch out for collision symbol. It's the 2 'radar' things and a button (which is not a button but a button like light). I'm trying to put it back in but do not remember (and forgot to make a photo) where I pulled the wires out of the (connector) and even which connector. It's 3 wires a pink one and a brown and blue which are twisted so they are side to side in a connector (I assume side to side). Is there anyone who has photo's of the connectors that go into the: display (mine is a monochrome by the way) in the lmm2-l2 box and the BCM T4 box, or a link to a picture?
It's kind of hard to find some wiring info about these actually common boxes. I did not make a photo of the display connector, but only the brown blue ones can fit there. For the other boxes, the pink one can only fit in the brown and the white connector, the brown blue ones in the grey and black connectors.
Thank you for reading about my stupid cutting and I hope someone can shed some light...
I attached pictures of the 2 boxes I mean (lmm2 and bcm).